|
TO MODIFY HEIGHT
|
|
|
 |
|
|
|
|
The frame is provided with holes that allow to lower the power set, therefore to reduce the height.
|
|
|
|
|
|
OPERATING LEVER
|
|
|
 |
|
|
|
|
It can be positioned in 4 different points within 180° for a optimum ease of operation. To change position of the lever, unscrew and re-fit in desired position.
|
|
|
|
|
APPROACH STROKE LIMITING BRACKET (T.D.C.)
|
|
|
 |
|
The bracket is used to position the tool. It shortens the return stroke of the piston rod, in observance of CEE rules that prescribe a max gap of 6 mm between tool and workpiece.
The positioning is made by moving the piston rod to the desired position by means of the lever, then loosening the screw of the bracket, sliding it to the upper ledge and re-tightening the screw.
|
|
|
|
|
|
