|
CONTROL FOR SINGLE ACTING HYDRAULIC CYLINDERS (return with mechanical spring)
|
|
|
| Scheme details |
Quantity no. |
Ordering code |
| Intensifier |
1 |
MF102-150 |
| Fixings (if any) |
1 |
CN FL 100 |
| Reservoir |
1 |
SN-01 |
|
|
CONTROL FOR DOUBLE ACTING HYDRAULIC CYLINDERS (return with hydropneumatic spring)
Return thrust of hydraulic cylinders can be regulated changing the air pressure in reservoir S2 (max 6 bar).
|
|
|
| Scheme details |
Quantity no. |
Ordering code |
| Intensifier |
1 |
MF163-150 |
| Fixings (if any) |
2 |
CN PB 160 |
| Reservoir |
1 |
SN-01 |
| Reservoir |
1 |
SN-14 |
|
|
CONTROL FOR DOUBLE ACTING HYDRAULIC CYLINDERS
- Low pressure approach stroke A
- High pressure working stroke B
WORK CYCLE
- Approach stroke A: fluid goes directly to cylinder H from reservoir S1
- Working stroke B: starting of MF intensifier
- Return cylinder H: fluid goes back to intensifier MF and to reservoir S1
|
|
|
| Scheme details |
Quantity no. |
Ordering code |
| Intensifier |
1 |
MF162-150 |
| Fixings (if any) |
2 |
CN PB 160 |
| Reservoir |
2 |
SN-14 |
|
|
NOTE
- Reservoirs and fixings (flange and feet) have to be ordered separately
- Intensifiers and fixings are supplied without oil
- It is possible to supply oil reservoirs type SN12 - 14 with bigger capacity
- We suggest to use hydraulic oil with viscosity 3° E at 50° C
- Use filtered air max 6 bar
NOTE
A standard intensifier with 150 mm standard stroke has been employed in all
above described solutions. When an intensifier with different stroke is
requested, replace the 150 value with the requested stroke in millimetres (100 -
200 - 250 - 300)
Example:
intensifier MF 102 - stroke 200 mm
CODE = MF102-200
|
|
