The simplicity of the control parameters programming procedure is one of the special features of the CSQ tool.
An example of step-by-step setting of the control values:
1) Setting the stop values.
The stoppage of the machine and the subsequent return to the idle position are controlled by CHECK-POINT.
The first operation necessary is the assignment of the force and/or stroke stop values.
2) Measuring
and memorising the curves for the production of a series of dimensionally controlled pieces.
3) Setting tolerance limits.
The stop value and subsequent force and/or stroke peak effectively reached by the machine may vary considerably. The tolerance limits check that this difference remains within preset values.
4) Positioning the control windows
paying particular attention to the critical aspects of the process.
5) Control
of production through the set parameters. Quality is guaranteed on 100% of the pieces produced.
