|
CSQ monitors the quality of 100% of the work performed by the production machines.
These are some of the advantages of their application in the assembly/monitoring processes:
COMPLETE MEASURING
|
|
|
The machine performs a complete processing cycle. At the end of the cycle the tool assesses the conformity of the piece produced (good or reject): any rejects may be replaced in several ways: reset for the subsequent cycle, acoustic or light signal, block of production with start-up code, collector with reset.
|
|
|
|
|
|
ACOUSTIC
code SON
|
TRAFFIC LIGHT
cod. LUM
|
CODE start cycle - reset
|
|
|
|
NON-DESTRUCTIVE MEASURING
|
|
|
For important and costly pieces: the press stops or cause the cycle to adopt emergency status at the first tolerance window which is not intersected.
|
|
|
|
|
 |
 |
 |
 |
|
|
|
|
PIECE DIMENSIONAL CONTROL
|
|
|
Where requested, the piece is checked before starting the assembly process. The tool checks that the component has the correct dimensional features
|
|
|
|
|
|
 |
 |
 |
 |
 |
|
|
|
|
UNDERSIZE PIECE
|
OVERSIZE PIECE
|
TOOL WORN
|
|
|
|
POSITIONING MOULDS
|
|
|
The display of the values ofthe sensors replaces to measuring tools in positioning
|
|
|
|
|
|
|
|
|
|
|
MEASURING FORCE FEATURES
|
|
|
and moving to determine flexion/compression values and define the structural features of the piece to be processed.
|
|
|
|
|
|
|
|
|
|
CONTROL AT VARIABLE HEIGHTS
|
|
|
When performing a process which must stay constant, even with dimensional changes of the piece on the contact point. The sensor contact(e.g.: pressure cell) on the piece indicates "0" on the encoder and recalls the press at the set penetration level.
|
|
|
|
|
|
|
|
|
|
|
|
|
